Here at Campbell Grinder Company innovation and multi-functional capability is our specialty. Not only do our machines Grind parts but many can Turn, Mill, Drill, Probe and, depending on the model, they can Creep Feed Grind, Conventional Grind, and Superabrasive Grind. Our machines are capable of ID grind, OD grind, taper grind, form grind, grind radial slots, grind arcs, grind faces and many other surfaces. The following pages are dedicated to showcasing the variety of applications our machines are capable of grinding. Click HERE to return to the main applications page.
If you are concerned with wall thickness variations, radial runout, surface finishes and increasing productivity, we can help. Campbell Grinder has developed machines specifically for the bearing industry that are capable of holding extremely high tolerances on bearings that range from 3” to over 100” in diameter depending on the machine model. Some of these machines would include pinch grinds capable of grinding I.D. and O.D. surfaces at the same time. Other machines combine the ability to hard turn and then grind to a single digit Ra surface finish in a single setup on the same machine.